Posts made in May, 2016

Necessary Precautions To Keep Your Rainwater Clean And Safe For Consumption

The quality of water from your rainwater tank will be determined by how well you’re able to carry out proper maintenance. If you have a rainwater tank, there are some key precautions you should observe to ensure your water is clean and safe. Below is an outline of key care and maintenance precautions for your water.

Proper Filtration

Proper filtration aids in the removal of bacteria, dirt, metals and chemicals among other water contaminants. The most important thing is to have the water in your rainwater tank tested by a certified specialist. The specialist will help you know the type of contamination you’re likely to encounter. Therefore, you’ll be able to get the most appropriate filtration system for your home. Remember that filtration significantly contributes to making your water safe for consumption.

Proper Gutter Maintenance

You should not let dirt, debris and leaves accumulate in the gutter that is collecting and directing rainwater to your tank. Remember that the dirt also often has droppings from birds and insects, and may at times hold a dead rodent, hence leading to severe contamination of your water.

It’s advisable you clean your gutters twice a year. However, if you have tree branches hanging above the gutter, you should clean your gutter more often. It’s also advisable you have the gutters cleaned after a storm because a lot of dirt accumulates in the gutters. Also, you may want to have a gutter mesh fixed on the gutter so as to reduce the rate of dirt accumulation in the gutter.

Timely Desludging

It’s important for you to remove the sludge in your water tank to ensure that the quality and safety of your water is ideal. Sludge buildup in the tank may affect the freshness of your tank water and also harbor bacteria and other disease-causing pathogens. To control the rate of sludge buildup, you may want to use a filter at the water inlet valve to trap any loose dirt that may be in the water.

It’s recommended that you desludge your water tank every two or three years. Call a desludging specialist to inspect the amount of buildup in your tank and get to know when to have the desludging done.

It’s important for you to observe necessary precautionary measures needed to ensure that collected rainwater is clean and safe for consumption. Hire professionals when necessary and get expert advice on the do’s and don’ts of rain water tank safety and maintenance.  

Read More

3 Judicious Strategies To Prevent The Occurrence Of An Electrical Fire In Your Home

Electrical fires in homes are more common than you think, especially when you are dealing with issues like faulty wiring and ageing appliances. Electrical home fires not only result in significant asset losses, but they could also pose severe danger to your family. Following certain judicious strategies can typically prevent most of these types of fires, so make sure you hire electrical contractors to take care of any small problem before it becomes a catastrophe.

Conduct Home Wiring Inspections

This aspect is particularly important if you have old wiring in your home. Old or faulty wiring is one of the leading causes of electrical fires, so it may be a prudent idea to hire electrical contractors to undertake an inspection of your home’s wiring every few years ­–– especially if you notice signs of fraying and tattering around the wires. Wires in poor condition can overheat and cause sparks, which will ultimately lead to an electrical fire if left unchecked. If your home wiring is in danger of causing an electrical fire, your electrician may recommend certain repairs or replacements to keep your home safe.

Avoid Overloading Electrical Circuits

Electrical circuit overloading is another common reason why electrical fires start in homes. Modern appliances consume more electricity than the existing capacity of older electrical circuits, which eventually causes overloading. This overloading typically happens when you place too many heavy-duty appliances like laptops, mobile phones, tablets, computers, lighting devices and lamps into the same power strip or electrical outlet. The best way to avoid overloading electrical circuits is to plug appliances into different circuits within your home. Alternatively, you can get your electrical contractors to replace existing circuits with higher capacity versions if possible.

Keep Electrical Appliances At A Safe Distance From Flammable Fabrics

Electrical appliances like irons, powerful lamps, hair straighteners and hairdryers generate a tremendous amount of heat while they are plugged into live power sockets. If these electrical appliances are left unattended next to flammable fabrics like towels, curtains, bed sheets, rugs, carpets and blankets, the entire room could catch fire without your knowledge. Similarly, many homeowners like to hide extension cords and power cables below carpets to sidestep a cluttered wiring appearance. But this could present an even larger problem when frayed cables and extension cords overheat and start an unprecedented electrical fire in your home.

These judicious strategies will help you prevent an electrical fire in your home. Keep in mind that any repairs, replacements or modifications of electrical systems are best undertaken by qualified electrical contractors for your safety.

Read More

May 2016
« Apr   Jun »